Gunsmith Brakes

“Felt Recoil” with a .308WIN reduced by roughly 50%. With larger powder capacity cartridges, like a .300WIN MAG, reduction of roughly 60% is achieved.

Product list

Product	Options and Price
9/16" Diameter Steel Unblued.	3/8-40 $60.00
9/16" Diameter 416 Stainless	3/8-40 $65.00
5/8" Diameter Steel Unblued.	7/16-28 1/2-28 $60.00
5/8" Diameter 416 Stainless	7/16-28 1/2-28 $65.00
11/16" Diameter Steel Unblued.	1/2-28 $60.00
11/16" Diameter 416 Stainless	1/2-28 $65.00
3/4" Diameter Steel Unblued.	9/16-28 5/8-28 $60.00
3/4" Diameter 416 Stainless	9/16-28 5/8-28 $65.00
13/16" Diameter Steel Unblued.	9/16-28 3/4-28 $60.00
13/16" Diameter 416 Stainless	9/16-28 3/4-28 $65.00
7/8" Diameter Steel Unblued.	11/16-28 3/4-28 $60.00
7/8" Diameter 416 Stainless	11/16-28 3/4-28 $65.00
15/16" Diameter Steel Unblued.	3/4-28 11/16-28 $60.00
15/16" Diameter 416 Stainless	3/4-28 11/16-28 $65.00
1" Diameter Steel Unblued.	3/4-28 13/16-28 $60.00
1" Diameter 416 Stainless	3/4-28 13/16-28 $65.00

Additional Information

Intended to be custom fit. Muzzle lathe-turned/threaded by a gunsmith and brake blued/painted/polished to match barrel. Maximum stock OD to be turned (removed) is 1/16”.<p>EXAMPLE: Muzzle diameter is .600” - start with .625” brake and turn to .600”. Thread will be7/16-28 or 1/2-28, gunsmith’s choice.<p> Bore of brake to be opened-up approximately 1/32” larger than bullet diameter. Brake should be crowned to suit, then polished to barrel’s finish.

Back

Next